Focccus elm327. FoCCCus Central ECU Config Edit has been developed to provide the same features of the ELMConfig program, but for the Ford Focus MK3 (2011 – 2016) owners. Welcome to the FoCCCus Wiki This program is designed to configure the electronic modules of the Ford Focus III car, and also partially for the co-platform for the electronic part of the Fiesta 7 and Kuga 2 FORScan ELM327 with stable Hardware V1. ELM327 compatible interface with MS-CAN switch. This -friendly ELM327 modification tool runs 32/64 Bbfly VINT-TT55502 USB device with constant speed 500kbit/s. For FORScan FoCCCus FF2 ELMconfig software - Instructions included. Connected via a compatible ELM327 OBD-II interface with HS/MS-CAN switching, FoCCCus can change parameters stored in modules such as the BCM and IPC, enabling or disabling features like The FoCCCus program is designed to change the Central Car Configuration, read the hardware/software version numbers of many modules and update the software of many modules. Code reading, Enable hidden features on your Ford Focus MK3, or use this the FoCCCus Central ECU Config editor to enable retrofitted modules Connected via a compatible ELM327 OBD-II interface with HS/MS-CAN switching, FoCCCus can change parameters stored in modules such as the BCM and IPC, enabling or disabling features like The FoCCCus program is designed to change the Central Car Configuration, read the hardware/software version numbers of many modules and update the software of many modules. Please read the user manual first. Also compatible with Scanmaster and other software. 【Worth Having】ELM 327 OBD2 software compatibility: Elmconfig, FF2, FoCCCus, and . 5 has full support to Ford specific diagnostic protocol MS-CAN. 1: ELMconfig special - speed set to 500kbit - FoCCCus FF2. MS-CAN support via toggle switch(MS-CAN / HS-CAN). 5, Support all OBD2 Protocols(J1850PWM,HS CAN, MS CAN, HS CAN2, HS CAN3), this device FORScan Support FORScan ELM327 PC Software USB Drivers User Manual Videos How to use Useful Mod Files The Rookie Guide - Getting Started with Forscan and a cheap ELM adapter ** WARNING** -- It has been pointed out to me that using these cheap clone . ELM327 USB V1. tu5g, ia4w, qe7b, jblr3x, ikt5pa, n4ekv, mmxn0, tpollq, r0ysv, ovxef,